#NDS MAC EMULATOR CODE#

The ARM9 code is running in main RAM, and the ARM7 has a bunch of main RAM regions to copy and clear: as EXMEMCNT is set to give priority over main RAM to the ARM7, the concurrent accesses are slowing down the ARM9. We then added code to measure how long each side takes to complete its tasks, and it turns out that the ARM9 takes much longer than expected. Then, another test determined that, infact, on hardware, the RAM size change isn't applied until the ARM7 has cleared all its memory regions. My first tests were to see if there was any kind of secret register altering main RAM mapping somehow, but there was none. So I made a homebrew that reproduced the loader code: same ASM code, same memory regions, same everything. Oh and the ARM9 caches are disabled when the loader is running, so they don't come into play here. The RAM size gets changed instantly on both sides, and there's nothing fancy about memory mapping either. I had already experimented with the RAM size register, to try and find out if there's anything fancy about it, but there's nothing special at all.

Yet, the same code works fine on hardware. As a result, the ARM9 changes the main RAM size while the ARM7 is still clearing regions, causing it to overwrite the ARM9's code, and you guess how this goes: kaboom. However, while the ARM7 has a bunch of regions in main RAM to clear, the ARM9 is given empty copy/clear lists, and all it has to do is clear its DTCM, which is quickly done. The basic process of the loader is as follows: the ARM9 syncs with the ARM7 via IPCSYNC, then both CPUs run through lists of memory areas to copy or clear, then the ARM9 changes the main RAM size if required. SCFG_EXT9.bit14-15 affect the Main RAM mapping on ARM9 and ARM7 side (that, at least AFTER games have been booted, however, there's a special case DURING boot process: For NDS games, the firmware switches to 4MB mode on ARM9 side, whilst ARM7 is still relocating memory from the 16MB area at the same time - unknown how that is working exactly, maybe ARM7 isn't affected by SCFG_EXT9 setting until ARM7 has configured/disabled its own SCFG_EXT7 register).

#NDS MAC EMULATOR FULL#

In practice, however, there is an issue that kept us from enabling that feature: when it's enabled, the DSi launcher crashes when launching a DS game, while they would otherwise run fine (albeit with the full 16MB RAM instead of the 4MB they might expect).ДЄs explained in GBAtek, nocash ran into the same issue: In theory, not a very difficult thing to implement. The RAM size register is mainly used to restrict the accessible main RAM to 4MB before launching a DS game. I felt like looking at another of the known DSi-mode issues: the fact that we currently don't implement the RAM size register in SCFG_EXT9. Sometimes I wish all issues were this simple.

The issue was another unimplemented AES feature, and was fixed in melonDS 0.9.3. One example of a fun issue that had been reported a while ago: the DSi menu would freeze after the health/safety screen if any pictures were stored that could be displayed on the top screen. However, the road to DSi emulation is paved with all sorts of challenges. Not just in the sense of running DSi games faithfully: a good reproduction of the DSi environment is also useful to would-be homebrewers. You might have noticed that one of my goals for the 1.0 release is to get DSi mode in melonDS up to par with DS mode. If you're running into trouble: Howto/FAQ

(WIP) Wifi: local multiplayer, online connectivity.

Various display position/sizing/rotation modes.

Nearly complete core (CPU, video, audio.

While it is still a work in progress, it has a pretty solid set of features: MelonDS aims at providing fast and accurate Nintendo DS emulation.

Nds mac emulator